solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / spd __ __ __ screening 2 / __ = not screened tx = tx level txv = txv s = s level package type __ = axial leaded sms = surface mount square tab voltage/family 5415 = 50v 5416 = 100v 5417 = 200v 5418 = 400v 5419 = 500v 5420 = 600v spd5415 thru spd5420 and spd5415sms thru spd5420sms 3 amps 50 600 volts 150 ? 400 nsec fast recovery rectifier features: ? fast reverse recovery (faster versions available) ? piv to 600 volts (higher voltages available) ? hermetically sealed ? controlled avalanche ? low thermal resistance ? high surge capability ? available in axial & square tab versions ? metallurgically bonded ? tx, txv, and s-level screening available 2 / ? replacement for: 1n 5415, us thru 1n5420, us maximum ratings 3 / rating symbol value unit peak repetitive reverse voltage and dc blocking voltage spd5415 spd5416 spd5417 spd5418 spd5419 spd5420 v rrm v rwm v r 50 100 200 400 500 600 volts average rectified forward current 4 / t a = 55 c t a = 100 c i o 3 2 amps peak surge current (10 surges of 8.3 msec each at 1 minute intervals superimposed on i o = 0, v rsm = 0, t a = 100 c) i fsm 80 amps operating & storage temperature t j and t stg -65 to +175 c thermal resistance junction to lead for axial, l =.375" junction to end tab for surface mount r jl r jec 20 10 c/w notes: 1 / for ordering information, price, operating curves, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4/ these ratings are typical for pc boards where thermal resistance from mounting point to ambient is sufficiently controlled where t j(max) is not exceeded. for 3.0 amps at t a = 55 c, derate linearly at 22 ma for 55 c t a 100 c. for 2.0 amps at t a = 100 c, derate linearly at 25 ma for 100 c t a 175 c. axial leaded sms note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0106b doc
solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 s sdi@ssdi-power.com * www.ssdi-power.com spd5415 thru spd5420 and spd5415sms thru spd5420sms electrical characteristics 3 / characteristics symbol value unit min max forward voltage i f = 1.5 adc i f = 9 adc, 300 s pulse i f = 0.5 adc, t a = -55 c v f1 v f2 v f3 0.5 0.6 0.5 1.2 1.5 1.4 vdc breakdown voltage (i r = 50 adc) spd5415 spd5416 spd5417 spd5418 spd5419 spd5420 v (br) 55 110 220 440 550 660 vdc maximum reverse leakage current (rated v r , t a = 25 c) (spd5415 thru 5417- rated v r , t a = 100 c) (spd5418 thru 5420- rated v r , t a = 100 c) i r1 i r2 i r3 1.0 20 30 a junction capacitance (v r = 4 vdc, 100khz f 1mhz) c j 120 pf maximum reverse recovery time (i f = 500ma, i r = 1a, i rr = 250ma) spd5415 thru spd5418 spd5419 spd5420 t rr 150 250 400 ns notes: 1 / for ordering information, price, operating curves, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4/ these ratings are typical for pc boards where thermal resistan ce from mounting point to ambient is sufficiently controlled wh ere t j(max) is not exceeded. for 3.0 amps at t a = 55 c, derate linearly at 22 ma for 55 c t a 100 c. for 2.0 amps at t a = 100 c, derate linearly at 25 ma for 100 c t a 175 c. package outlines : dimensions (inches) dimensions (inches) dim. minimum maximum dim. minimum maximum a .140 .180 a .170 .180 b .190 .260 b .240 .300 c .037 .042 c .023 .028 d .90 1.30 d .002 --- axial sms note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0106b doc
|